A user asked about greyed out hosts and datastores in a trial version of ControlUp on-premise. After asking questions, it was discovered that the service account for the SQL DB had misconfigured and expired. After being fixed, the user was able to drill down and up again.
Read the entire article here...
ControlUp Community Training & Support Archives
All training and support-related archives from inside the ControlUp Community on Slack.
Troubleshooting a Trigger to Delete Profiles in ControlUp
A user was trying to set up a trigger that would delete profiles older than one day if disk space drops below 10%, but the trigger wouldn't run. It turned out that it needed to be set up to delete at an exact threshold (e.g., 10%), and not a range (e.g., 9% to 11%). The user enabled an email alert to confirm the CU was picking up the trigger, and adjusted the settings so it would run below their personal threshold.
Read the entire article here...
Read the entire article here...
Troubleshooting Error “File… is not digitally signed… see about_Exectin_Policies…” in ControlUp
The user was running an Analyze Logon Duration script against two different VDI environments but was receiving an error message relating to the execution policy not being set correctly with the W2K12 PVS. Modifying the GPO was explored but it was ultimately discovered that the script was incorrectly signed because of a space being added at the end of the file. Suggestions were made to double-check scripts if modified by colleagues. ControlUp SBAs and an update to W2K19 were also mentioned.
Read the entire article here...
Read the entire article here...
How to Kick off Windows Systemreset Command from ControlUp Edge DX?
A user wondered if there was a way to kick off the Windows "systemreset -factoryreset" command with a script from Edge, as an alternative to the user going into recovery mode, but it seems that a prompt is required which will be unanswered if the user is not logged on. The user would not like to automate this process and the solution may not be worth the effort required to make it 100% safe.
Read the entire article here...
Read the entire article here...
The Benefit of Running RemoteDX and EdgeDX Together
A user asked if there was any benefit to running both RemoteDX and EdgeDX in addition to each other. They are completely different, with RemoteDX adding extra metrics to VDI sessions and EdgeDX focused on corporate physical endpoints. Though each offers different data, there is benefit in drilling down from RemoteDX to the device in EdgeDX. Real-Time DX and Edge DX are two different products, so EdgeDX data is not viewable in Real-Time DX but Solve and DEX provide this data in the same web interface.
Read the entire article here...
Read the entire article here...
Mitigating False Alarms on Failed Machinesin ControlUp
A user asked about false alarms being triggered on failed machines, and it was suggested to check the Incident tab in the (old) console to see values and to change the trigger to dump all machines, folders, sessions and processes to CSV files in order to analyze the incident. Mitigation strategies such as setting the threshold to at least 1 min was suggested.
Read the entire article here...
Read the entire article here...
Numerical Sorting in Custom Reports with ControlUp
A user asked about numerical sorting in custom reports with ControlUp. It was suggested that the data must first be interpreted when creating an index, meaning numbers must be read as numbers. If uploading decimals, multiplying them by 1000 can be a workaround. URLs mentioned were not included.
Read the entire article here...
Read the entire article here...
How to view (in the user reports) how long the session was idle on ControlUp?
The user wanted to track idle time in user reports, but couldn't find the column in the default view. It is available in the User Activity historical report. Wouter and Joel advised to access this data from Insights or the Solve button, but the column has not been ported over due to inaccuracy. The user eventually found it.
Read the entire article here...
Read the entire article here...
How to Run Scripts Periodically in ControlUp Edge DX
A user asked if it was possible to run a script periodically on a subset of clients in Edge DX. Suggested methods included using device tags and environment variables, or using Get-Random. Filtering by Edge DX device group is possible with the SIPDEVICEGROUP environment variable. More information can be found in the ControlUp documentation at https://support.controlup.com/docs/edge-dx-scripting-guide#example-for-powershell.
Read the entire article here...
Read the entire article here...
Any plans to upgrade ControlUp with Splunk to a version 9+?
The IOP team is looking at upgrading Splunk to a version 9+ after a customer's security scan revealed multiple vulnerabilities for versions below 9.x. In the meantime, exceptions have been put in place. IOP is a Splunk OEM product and cannot be incorporated into another Splunk solution, and multiple support requests have been sent as well. Ref #132898.
Read the entire article here...
Read the entire article here...