Suggestions were made to optimize the loginprocess and gain an even lower login time. Steps to audit process creation and termination were provided, along with many other settings related to the login process and the loading of AppX packages. It was mentioned that the worldwide average login duration is 27 seconds, but the user's logon time was 17.5 seconds, so they were doing well. The user may be able to remove the BIO_Enrollment package if not using bio logon methods.
Read the entire article here...
FSLogix Related Training & Support Archives
FSLogix training and support-related archives from inside the ControlUp Community on Slack.
How to remotely query the registry of machine using a ControlUp Script Action?
It is possible to query the registry of a machine using a Script action, however the user was getting 'access denied' errors. If the computer runs the CU agent, it might be easier to run the script there instead of remotely. It was suggested that PS remote needs to be enabled for Invoke-Commands. 8.8 release will allow users to see the value for VHDLocations as a column in console and Solve as part of the FSLogix integration.
Read the entire article here...
Read the entire article here...
Error 94 in FSLogix Log Parser Script
Users were having issues with the FSLogix log parsing script, showing an error in line 94. It was found that changing the line to include a '+' would solve the issue, which @member then confirmed. The update has been pushed to production, and the issue is now resolved.
Read the entire article here...
Read the entire article here...
Troubleshooting Slow Logons with ControlUp and FSLogix
A user asked for a way to examine slow logons in a new FSLogix configuration. @member suggested watching the ControlUp Analyze Logon Duration webinar for an introduction to the ALD script, followed by the extended Q&A blog/video. They also recommended launching an FSLogix log parser script to look for retries and the "loadProfile time" in the ControlUp logs. The user is asked to report their results. Weblinks: ControlUp Analyze Logon Duration webinar: https://www.controlup.com/webinars/webinar-end-slow-logons-forever-with-controlup/; ControlUp Analyze Logon Duration Q&A blog/video: https://www.controlup.com/resources/blog/entry/controlup-analyze-logon-duration-after-hours-an-extended-webinar-qa/; FSLogix log parser script: https://www.controlup.com/script-library-posts/fslogix-log-parser/.
Read the entire article here...
Read the entire article here...
How does ControlUp report failed logins in the logon duration report?
ControlUp users were discussing how to determine failed logins for the Logon Duration Report, and the root cause of the issue: the Antivirus product scanning thousands of files stored in the Roaming profile. The current FSLogix release was mentioned to be 'trash', while UPM has been known to work better with one issue. Citrix has been asked to incorporate a work-around in a future UPM release to solve the issue.
Read the entire article here...
Read the entire article here...
When users logon to a server that is provisioned by PVS dose the User profile go to the RAM cache or the DIFf disk?
A discussion was had around the use of Provisioning Services (PVS) and how it deals with user profiles. If profiles exceed 30GB, then it should be configured to overflow on disk, but FSLogix Containers are simply mounted and the writes directly into the VHDX file, not into RAM. For testing, users can change the altitude of the procmon or FSLogix Drivers.
Read the entire article here...
Read the entire article here...
Error “no more connections can be made to this remote computer” while distributing FSLogix AppMasking Rule from VDA
A user reported an error message they had received while attempting to distribute a single FSlogix AppMasking Rule from one VDA to 30+ others. The potential cause of the issue was suggested to be the number of concurrent file sharing connections being limited in Windows desktop OS as a license limit. The ControlUp support team requested some additional information to investigate the issue. The user mentioned they used an SMB share to host their FSlogix rules and GPOs, and copy them locally during gpupdate.
Read the entire article here...
Read the entire article here...
How to configure SBA for alerting when an FSLogix container size exceeds a threshold
Members asked for an SBA that allows to alert when an FSLogix container size exceeds a threshold. Through a configuration process the actions should be finalized and a "User Logged On" trigger should be created. An event will be written to the Application Log when a user's VHD is outside the threshold and a "Windows Event" trigger can trigger any action. An 8.8 BETA program will be available in Q1 23 and those interested can reach out to @member and @member.
Read the entire article here...
Read the entire article here...
Detecting Corrupted Disks in FSLogix Profile Management
A user asked how to detect corrupted disks in FSLogix profile management when the profile share was full. Another user suggested creating a ScriptAction to be run when the user logs in so details can be captured and alerted if thresholds are exceeded. The ScriptAction will enter the thresholds into the arguments. It will be shared once finished. https://controlupcommunity.slack.com/archives/C046GSUMTJ9/p1670282169889989
Read the entire article here...
Read the entire article here...
Errors in Excel when trying to open the export of a SBA? Specifically the FSLogix log parser
When trying to open the export of an SBA in Excel, users can encounter errors due to a maximum row height of 409.25. Support helped to determine that double-clicking into the cell or highlighting and pasting the data into Word or NotePad can provide solutions.
Read the entire article here...
Read the entire article here...