ControlUp Community

Connect, Learn, and Grow

SaaS & Web App Availability Testing Archives

SaaS & Web App Availability Testing training and support-related archives from inside the ControlUp Community on Slack.

Troubleshooting Connection Issues with Hive in ControlUp

Posted on

The user had installed Hive on a device, but the status showed "Not Connected". After re-doing the configuration and checking the firewall, the Network team confirmed that the firewall was open and the URLs were reachable. The link for the required outbound connections is: https://support.controlup.com/docs/communication-ports-used-by-controlup-hybrid-cloud-1.

Read the entire article here...

Troubleshooting ControlUp Scout for Microsoft Teams

Posted on

Rick was attempting to configure ControlUp Scout for Microsoft Teams but one of the tests was failing. They wanted to know where the hive was located and after they identified it as a custom hive on the internal network, it was suggested that it may be due to a firewall issue. As a first step, it was suggested to make sure calls can be initiated from the custom hive location. More information can be found in the ControlUp support page https://support.controlup.com/docs/custom-hive-overview.

Read the entire article here...

Enhancing the ControlUp Dashboard with a Status Indicator of Last Result

Posted on

A user suggested adding a status indicator of “last result” in the ControlUp dashboard page that would show which scouts are down. The possible implications of having multiple hives per scout were discussed; it was suggested that a single failed hive could be denoted with a red or orange indicator. The suggestion was motivated by a real life scenario of 40 sites with the same function, 10 of which were not responding and the user not having an overview of the working ones.

Read the entire article here...

The ControlUp Blog – A ‘Technical’ Wealth of Knowledge! 

Posted on

As I prepared to write this, I sat back. I tried to think of another company’s blog that was as technical, deep, and truly useful in showing the value their software brings and diving deep and leaving the reader more educated with actionable results. I can only think of one, AND the ControlUp Blog! With that in mind, I recommend adding the ControlUp Blog to your reading list.…

Read the entire article here...

Help: uptime of a ControlUp Scout could be 0% and Successful Runs :0/0 but when I do a test it works?

Posted on

A user asked why a PING scout was running but a HTTP/S scout was not, despite the scout being enabled. They were advised to run "sb-hive.exe debug" from the command prompt in the VDI from the ControlUp management console. Previous discussion can be found at https://controlupcommunity.slack.com/archives/C046DUGB6M9/p1686066701593019. The user was then asked which custom hive version they used.

Read the entire article here...

Inviting Users to Scoutbees with Limited Permission

Posted on

A user asked why they can't invite a user in Scoutbees and give them only access to Scoutbees. Though integrated with Solve, Scoutbees can't directly invite users, but when the user migrates to DEX, they will be able to separate the different platforms/products. The user has asked Support to create another viewer user with only Scoutbees access.

Read the entire article here...

How can I create a group-specific offline device alert in ControlUp Edge DX without using static IPs?

Posted on

A user asked for help creating an alert in ControlUp Edge DX to detect when a device from a particular group goes offline. It was suggested that the Last Communication property is used to calculate "offline", and a static value could be used in the current alert system. The REST API can be used to get machines that have been offline for a certain amount of time. It was also suggested to look at the bell icon when creating an alert as a list of values with descriptions should be available.

Read the entire article here...