A user asked about using Microsoft AVS solution and ControlUp to monitor vSAN/vSphere hosts. It was noted that Microsoft does not allow turning on vSAN Performance Service "Read" permissions, which is required for monitoring. ControlUp gives back ERR in all the metrics columns. It was mentioned that a jumpbox may be needed for setup and that access is limited. The article available here (https://support.controlup.com/docs/vsan-prerequisites) may be helpful for troubleshooting.
Read the entire article here...
ControlUp for VDI (Real-Time DX) Training & Support Archives
ControlUp for VDI (Real-Time DX) training and support-related archives from inside the ControlUp Community on Slack.
Navigating Permissions and Training at ControlUp Academy
ControlUp Academy is a training platform for ControlUp software, offering free self-training and instructor-led content. Users can also obtain ControlUp certifications through the Academy at https://cuacademy.controlup.com/. Additionally, the discussion touched on permissions and login methods for the RT console, with @member providing tips on using SAML and ControlUp groups to resolve issues. The Academy can assist with further training on this topic.
Read the entire article here...
Read the entire article here...
Triggering Actions based on Specific Server Connection Failures in ControlUp Real Time Console
A discussion was held about being able to trigger an action based on the number of connection failures for a specific server. It was suggested to add a column in the Real Time Console to display the number of Citrix connection failures, which could then be used to create triggers. The user also asked about improved local host cache monitoring and the possibility of bringing it into the product. The ControlUp support team mentioned some relevant resources and offered to discuss further during an upcoming meeting.
Read the entire article here...
Read the entire article here...
Upgrading to the Latest Version of ControlUp and Switching Datastreams
A user asked if they could upgrade directly from their current version to the latest version of ControlUp and then change the datastream, or if they needed to go through multiple versions. Another user responded that they could upgrade directly and would be switched over to the streaming, with the team being notified ahead of time. It was suggested for the user to DM their organization name to have it added to the migration list.
Read the entire article here...
Read the entire article here...
Reducing Network Traffic between vCenter and ControlUp
A user asked about the high amount of network traffic between their vCenter and ControlUp. This could be due to the SOAP-based data collection, which would appear as HTTP traffic. It was suggested to run diagnostics on the data collector to confirm, and to consider creating a ControlUp site closer to the vCenter to reduce data traffic. Contacting a CSM or via DM was also recommended for further assistance. Event
Read the entire article here...
Read the entire article here...
Troubleshooting AppX Load Packages in ControlUp
A user was trying to figure out the discrepancy in the AppX load packages duration time and asked for clarification. Another user mentioned that the gap in the total duration was 2 seconds, caused by the operating system. They suggested disabling appx packages or checking storage speeds and profile sizes to improve login duration. Another user added that ControlUp shows what it knows to look for, but there may be other things happening that are not logged or classified yet. The original user thanked both for their helpful responses.
Read the entire article here...
Read the entire article here...
Refresh Time for API Connection in ControlUp RealtimeDX
A discussion was held about the refresh time for the API connection and RealtimeDX or Data Collector. It was mentioned that the data collection time for Horizon can be seen through invoke-cuquery, with a cycle starting every 10 seconds after the previous cycle is completed. The RealtimeDX version being discussed is 9.0.0.1680.
Read the entire article here...
Read the entire article here...
Limitations of RemoteDX and EdgeDX for Non-Windows Devices in ControlUp
A user was experiencing difficulty connecting to the physical endpoint with Edge DX from a VDI session. The link between RemoteDX and EdgeDX is currently only supported for Windows devices, and there are no plans for future support. This limitation can be reported and upvoted on Uservoice. The "jump to device" functionality may still be possible by copying the device name and searching for it in the device details tab. There is currently no documentation or mention of this limitation being a known issue or unsupported in the release notes or knowledgebase. It is believed to be due to the ability for RemoteDX to pull the device ID from Windows, which is not built in for Linux/IGEL/thin clients.
Read the entire article here...
Read the entire article here...
Troubleshooting EUC Connection in Citrix 2407
After upgrading a lab to Citrix 2407, a user noticed EUC Connection was no longer working and opened a ticket. The property 'VMPoweredOnDate' does not exist on type 'XenDesktopMonitor.XenDesktopMonitorV2.Connection'. A suggested method for troubleshooting is also mentioned.
Read the entire article here...
Read the entire article here...
Configuring Retention Policy for ControlUp Monitoring Data
A user asked about configuring a retention policy for monitoring data in real-time dx and edge dx. The only article found was for managing retention in Cu Insights, which is out of date. However, it was noted that this is managed from the backend with a default of 365 days for real-time and 30 days minimum for edge dx.
Read the entire article here...
Read the entire article here...