A user asked for help with data not updating on DEX for some machines and observed outbound connection problems. Another user suggested turning off the default setting for enabling outbound connection in the console and restarting the monitors. This should fix the issue.
Read the entire article here...
Reporting Related Training & Support Archives
Reporting training and support-related archives from inside the ControlUp Community on Slack.
Limitations of RemoteDX and EdgeDX for Non-Windows Devices in ControlUp
A user was experiencing difficulty connecting to the physical endpoint with Edge DX from a VDI session. The link between RemoteDX and EdgeDX is currently only supported for Windows devices, and there are no plans for future support. This limitation can be reported and upvoted on Uservoice. The "jump to device" functionality may still be possible by copying the device name and searching for it in the device details tab. There is currently no documentation or mention of this limitation being a known issue or unsupported in the release notes or knowledgebase. It is believed to be due to the ability for RemoteDX to pull the device ID from Windows, which is not built in for Linux/IGEL/thin clients.
Read the entire article here...
Read the entire article here...
Updating the Repair Domain Trust Script for Windows 11 Compatibility
Users discussed updating the Repair Domain Trust script to be compatible with Windows 11 and asked for input from other members. They referenced the script from ControlUp's VDI/DaaS action library and a solution from a third-party website. It was suggested to use the PowerShell cmdlet "Test-ComputerSecureChannel -Repair" and it was confirmed that it works on both Windows 10 and physical devices. The cmdlet can be found at https://learn.microsoft.com/en-us/powershell/module/microsoft.powershell.management/test-computersecurechannel?view=powershell-5.1.
Read the entire article here...
Read the entire article here...
Report on Reconnecting CVAD Sessions Longer Than 2 Hours
The users discuss ways to get a report on CVAD sessions that reconnect after 2 hours of disconnect time. One suggestion is to create a trigger on idle time and another is to use the session activity reports for more specific information. However, the reporting process may be slow in larger environments. Resource usage information is also shared.
Read the entire article here...
Read the entire article here...
Troubleshooting Reports for Installed Printers in ControlUp
Discussions regarding reports for installed printers took place in the ControlUp Slack channel. A script from the Edge DX script library was suggested as a solution, along with a section with SIP_EVENT tags and information in the script guide. It was mentioned that the script may need to be configured and checked for the overwrite checkbox in order to display properly. Various suggestions for displaying the information in the UI were also given.
Read the entire article here...
Read the entire article here...
How to Create a Custom Report in ControlUp for Devices
A user asked where to find the option for creating a new custom report under Devices. Another user suggested that it should be located under the gear icon, and if permission changes prevented the user from seeing it, they should check the DEX audit log icon on the side. The issue was resolved.
Read the entire article here...
Read the entire article here...
Troubleshooting a ControlUp Alert in Edge DX
A user noticed a change in the way a specific alert in ControlUp works, and was unsure of which computers were triggering the alert. Another user shared a script they had made to gather data, which may be helpful in this situation. Suggestions were made, such as adjusting the retrigger delay and modifying the time window, but the issue remains unresolved. The thread also includes code for a script that may assist with gathering data.
Read the entire article here...
Read the entire article here...
Stopping Agents from Sending Process Info on wfica32.exe in EdgeDX
A user asked about stopping the agent from sending process information on wfica32.exe in EdgeDX. A response explained that this may be due to two separate data collection cycles and suggested checking if Citrix HDX Engine appears in the Employee / End User Activity reports. The Edge DX team confirmed that these are two separate data collection methods and excluding the process from custom settings will not exclude it from the End User Activity index / reports.
Read the entire article here...
Read the entire article here...
Creating Alerts for Microsoft Applications in ControlUp
A user asked how to create an alert for various Microsoft applications using the "Top process by application crashes" report. The solution involves using the win_event_log table and setting event_level to 2. Additionally, the text should use "contain" instead of "equals."
Read the entire article here...
Read the entire article here...
Custom Columns and Pending Reboot Feature in ControlUp
A user asked if it is possible to make custom columns, specifically a "pending reboot" column, in the details window of ControlUp. Other users suggested using scripts to create custom data indexes and introduced the Uservoice platform for feedback. Other users expressed interest in a feature to view pending reboots, and one user shared that they have a script to deploy and import into a table for this purpose. A link to the scripting guide was also provided.
Read the entire article here...
Read the entire article here...